15.5 iRMC microSD card 305
15.5.1 Note for embedded Lifecycle Management (eLCM) 305
15.5.2 Installing the iRMC microSD card 306
15.5.3 Removing the iRMC microSD card 307
15.5.4 Replacing the iRMC microSD card 309
15.6 M.2 SSD 311
15.6.1 Slots and bolts for M.2 SSDs 311
15.6.2 Installing an M.2 SSD 312
15.6.3 Removing an M.2 SSD 316
15.6.4 Replacing an M.2 SSD 318
15.7 Dual microSD 64GB Enterprise 319
15.7.1 Position of the Dual microSD 64GB Enterprise 319
15.7.2 Installing the Dual microSD 64GB Enterprise 319
15.7.3 Removing the Dual microSD 64GB Enterprise 322
15.7.4 Replacing the Dual microSD 64GB Enterprise 324
15.7.5 Replacing the microSD card 326
15.8 System board 328
15.8.1 Replacing the system board 328
16 Appendix A 337
16.1 Mechanical overview 337
16.1.1 Server front 337
16.1.1.1 3.5-inch HDD configuration 337
16.1.1.2 2.5-inch HDD/SSD configuration 337
16.1.2 Server rear 339
16.1.2.1 Server rear with standard PSU 339
16.1.2.2 Server rear with hot-plug PSUs 340
16.1.3 Server interior 341
16.1.3.1 Servers with standard PSU 341
16.1.3.2 Servers with hot-plug PSUs 342
16.2 Connectors and indicators 343
16.2.1 Connectors and indicators on the system board 343
16.2.1.1 System board D3929 343
Content
RX1330 M5 Upgrade and Maintenance Manual
To Next Page
Loading...
