GAMATRONIC ELECTRONIC INDUSTRIES LTD.
106
2. Using the arrow keys, set the date and time, and then press Ent:
[Main Menu > SETUP > (password) > Time]
Set real time
Year Month Day Hour Min Sec
2011 09 30 23 58 00
Figure 206: Set date and time
7.11.3 Setting the Site Number
1. Select Site:
[Main Menu > SETUP > (password) > Ent]
1> Alarm set 5> Time 9> Silicon
2> Module conf. 6> Site
3> Battery 7> Password #1
4> Charge 8> Service
Figure 207: Setup menu
2. Use the arrow keys to set the site number, and then press Ent:
[Main Menu > SETUP > (password) > Site]
Figure 208: Set site number
Note: The serial number of Power+ is on a bar-code label at the bottom of the unit, on the left hand side.
To Next Page
Loading...
