Gamatronic Power+ - Setup - Module Conf. Option; Figure 138: Main Menu Option 7 (Setup - Module Conf.); Figure 139: Level 1 Password Access

GAMATRONIC ELECTRONIC INDUSTRIES LTD.
POWER
+
PARALLEL
UPS,
USER GUIDE
,
REL
.
2.0
85
7.9 “Setup – Module Conf.” Option
MAIN
MENU
OPTIONS
- - - Module Config. SUBMENU OPTIONS - - -
SYSTEM
UPS MODULE
SELFTEST
HISTORY
BATTERY
ALARM
SETUP
STATIC SW.
2) Module Config.
Password:
<<<<<<<<
1) Num of phase
2) Module/s frequency
3) Module/s voltage
4) Update Vo/Fr/ph
5) Output Adjust
6) Frequency Limits
7) DC Calibration
8) AC Calibration
SET MODULE/S
FREQUENCY
Set Module/s
voltage
Update Vo/Fr/ph
settings
Select A Phase
To Adjust
Select A Module
To Adjust
Select A Value To
Adjust
Set frequency
limits
1) Calibrate Positive
Voltage
2) Calibrate Negative
Voltage
Set Positive
Voltage
Set Negative
Voltage
1) Calibrate INPUT
Voltage
2) Calibrate OUTPUT
Voltage
Calibrate INPUT
Voltage
Calibrate OUTPUT
Voltage
Figure 138: Main Menu option 7 (“Setup – Module Conf.”)
1. To enter Setup, use the default password <<<<<<<< (left arrow key eight times).
[Main Menu > SETUP]
POWER+ System Setup
Type in Level-1 PASSWORD, THEN – ENTER
Your privilege will expire after 15 min.
PASSWORD:________
Figure 139: Level 1 password access