GAMATRONIC ELECTRONIC INDUSTRIES LTD.
126
7.15.2 Connection Status of UPSs
In the screen shown in Figure 275, UPSs 1 and 2 are connected and UPSs 3 and 4 are not connected.
UPSs 5 – 9 are non-existent.
[3-second Esc > UPSs Stat]
Figure 275: Connection status of UPSs
7.15.3 On/Off Status of UPSs
In the screen shown in Figure 276, UPSs 1 – 3 are on, UPS 4 is off, and UPSs 5 – 9 are non-existent.
[3-second Esc > UPSs On/Off]
Figure 276: On/Off status of UPSs
7.15.4 Software and Communication Revision
The firmware revision refers to the firmware located on the main Power+ board. The communication
revision refers to the communication board revision.
[3-second Esc > SoftWare Rev]
FIRMWARE REV: SC25011208
COMM REV: 254.102
Figure 277: Software and communication revision