Grandstream Networks UCM6206 User Manual

P a g e | 191
UCM6200 Series User Manual
Enable Caller Menu
If enabled, conference participant could press the * key to access the conference
bridge menu. The default setting is "No".
Record Conference
If enabled, the calls in this conference bridge will be recorded automatically in a
.wav format file. All the recording files will be displayed and can be downloaded in
the conference web page. The default setting is "No".
Quiet Mode
If enabled, if there are users joining or leaving the conference, voice prompt or
notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
Wait For Admin
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not be
announced.
Enable User Invite
If enabled, users could press 0 to invite other users (with the users' permission) or
press 1 to invite other users (without the user's permission) to join the conference.
The default setting is "No".
Note:
Conference administrator can always invite other users without enabling this option.
Announce Callers
If enabled, the caller will be announced to all conference participants when there
the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
Public Mode
If enabled, no authentication will be required when joining the conference call. The
default setting is "Yes".
Play Hold Music
If enabled, the UCM6200 will play Hold music when there is only one user in the
conference. The default setting is "No".
Music On Hold
Select the music on hold class to be played in conference call. Music On Hold class
can be set up under web UI->PBX->Internal Options->Music On Hold.
Skip Authentication
When Inviting User
via Trunk from Web
GUI
If enabled, the invitation from Web GUI for a conference bridge with password will
skip the authentication for the invited users. The default setting is "No".
Conference Settings contains the following options:
Table 63: Conference Settings
Enable Talk detection
If enabled, the AMI will send the corresponding event when a user
starts or ends talking.

Grandstream Networks UCM6206 Specifications

General

Brand	Grandstream Networks
Model	UCM6206
Category	IP Phone
Language	English