Grandstream Networks UCM6206 - Active Calls and Monitoring; Monitoring Active Calls

P a g e | 254
UCM6200 Series User Manual
Extension
Select the extension to call.
Prompt
Select the prompt to play for that extension.
Custom Date
If disabled, users can select a specific date and time.
If enabled users can select multiple days of the week to perform the
wakeup.
Date
Select the date or dates when to performs the wakeup call.
Time
Select the time when to play the wakeup call.
WakeUp service from User portal
- Login to the user portal on the UCM6200.
- WakeUp service can be found under “Value-added Features -> Wakeup Service”, click on
to create a new wakeup service.
- Configures the Name, Prompt, Date and Time for the user to make the wakeup to.
- Click and to apply the changes.
WakeUp service using feature code
- Login to the UCM as admin.
- Enable “Wakeup Service” from the WebGUI under “PBX -> Internal Options -> Feature Codes”.
- Click and to apply the changes.
Dial “*36” which is the feature code by default to access to the UCM wakeup service in order to add, update,
activate or deactivate UCM wakeup service.