Grandstream Networks UCM6206 - Room Status; Table 100: PMS Basic Settings; Figure 189: Create New Room

P a g e | 287
UCM6200 Series User Manual
Table 100: PMS Basic Settings
Field
Description
PMS Module
Users can select the desired PMS module from the drop-down list.
Hmobile.
Mitel.
Wake Up Prompt
Prompt used when answering the wakeup calls it can be customized from
“PBX>Internal Options>Custom Propmpt
PMS URL
Enter the PMS system URL
UCM Port
Enter the Port used by the PMS system
Username
Enter the Username to connect to the PMS system
Password
Enter the password to connect to the PMS system
Room Status
User can create Rooms by clicking on , the following Figure will be displayed then.
Figure 189: Create New Room
Click “Save” to create the new room, the fields above can be configured from the HMobile platform, once set the
following screen will be shown: