ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)
The UCM6200 supports Asterisk Manager Interface (AMI) with restricted access. AMI allows a client program to
connect to an Asterisk instance commands or read events over a TCP/IP stream. It’s particularly useful when
the system admin tries to track the state of a telephony client inside Asterisk.
User could configure AMI parameters on UCM6200 web GUI->PBX->Internal Options->AMI. For details on
how to use AMI on UCM6200, please refer to the following AMI guide:
http://www.grandstream.com/sites/default/files/Resources/UCM_series_AMI_guide.pdf
----------------------------------------------------------------------------------------------------------------------------- ---------------
Warning:
Please do not enable AMI on the UCM6200 if it is placed on a public or untrusted network unless you have taken
steps to protect the device from unauthorized access. It is crucial to understand that AMI access can allow AMI
user to originate calls and the data exchanged via AMI is often very sensitive and private for your UCM6200
system. Please be cautious when enabling AMI access on the UCM6200 and restrict the permission granted to
the AMI user. By using AMI on UCM6200 you agree you understand and acknowledge the risks associated with
this.
----------------------------------------------------------------------------------------------------------------------------- ---------------
To Next Page
Loading...
