BLF AND EVENT LIST
BLF
The UCM6200 supports BLF monitoring for extensions, ring group, call queue, conference room and parking lot.
For example, on the user's phone, configure the parking lot number 701 as the BLF monitored number. When
there is a parked call on 701, the LED for this BLF key will light up in red, meaning a call is parked against this
parking lot. Pressing this BLF key can pick up the call from this parking lot.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
On the Grandstream GXP series phones, the MPK supports "Call Park" mode, which can be used to park the
call by configuring the MPK number as call park feature code (e.g., 700). MPK "Call Park" mode can also be
used to monitor and pickup parked call if the MPK number is configured as parking lot (e.g., 701).
----------------------------------------------------------------------------------------------------------------------------- ---------------
Event List
Besides BLF, users can also configure the phones to monitor event list. In this way, both local extensions on the
same UCM6200 and remote extensions on the VOIP trunk can be monitored. The event list setting is under web
GUI->Call Features->Event List.
• Click on "Create New Event List" to add a new event list.
• Sort selected extensions manually in the Eventlist
• Click on to edit the event list configuration.
• Click on to delete the event list.
Table 79: Event List Settings
Configure the name of this event list (for example, office_event_list). Please note
the URI name cannot be the same as the extension name on the UCM6200. The
valid characters are letters, digits, _ and -.
If LDAP sync is enabled between the UCM6200 and the peer UCM6200, the
remote extensions will be listed under "Available Extensions". If not, manually
enter the remote extensions under "Special Extensions" field.
To Next Page
Loading...
