Grandstream Networks UCM6206 User Manual

P a g e | 207
UCM6200 Series User Manual
VOICEMAIL
Configure Voicemail
If the voicemail is enabled for UCM6200 extensions, the configurations of the voicemail can be globally set up
and managed under Web GUI->PBX->Call Features->Voicemail.
Table 67: Voicemail Settings
Max Greeting
Configure the maximum number of seconds for the voicemail greeting. The
default setting is 60 seconds.
Dial ‘0’ For Operator
If enabled, the caller can press 0 to exit the voicemail application and connect
to the configured operator’s extension.
Operator Extension
Select the operator extension, which will be dialed when users press 0 to exit
voicemail application. The operator extension can also be used in IVR.
Max Messages Per
Folder
Configure the maximum number of messages per folder in users’ voicemail. The
valid range 10 to 1000. The default setting is 50.
Max Message Time
Select the maximum duration of the voicemail message. The message will not
be recorded if the duration exceeds the max message time. The default setting
is 15 minutes. The available options are:
• 1 minute
• 2 minutes
• 5 minutes
• 15 minutes
• 30 minutes
• Unlimited
Min Effective Message
Time
Configure the minimum duration (in seconds) of a voicemail message.
Messages will be automatically deleted if the duration is shorter than the Min
Message Time. The default setting is 3 seconds. The available options are:
• No minimum
• 1 second
• 2 seconds
• 3 seconds
• 4 seconds
• 5 seconds
Note:
Silence and noise duration are not counted in message time.
Announce Message
Caller-ID
If enabled, the caller ID of the user who has left the message will be announced
at the beginning of the voicemail message. The default setting is "No".

Grandstream Networks UCM6206 Specifications

General

Brand	Grandstream Networks
Model	UCM6206
Category	IP Phone
Language	English