----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
When there is participant in the conference, the conference bridge configuration cannot be modified.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Record Conference
The UCM6200 allows users to record the conference call and retrieve the recording from web GUI->PBX->Call
Features->Conference.
To record the conference call, when the conference bridge is in idle, enable "Record Conference" from the
conference bridge configuration dialog. Save the setting and apply the change. When the conference call starts,
the call will be automatically recorded in .wav format.
The recording files will be listed as below once available. Users could click on to download the recording or
click on to delete the recording. Users could also delete all recording files by clicking on “Delate All
Recording Files”, or delete multiple recording files at once by clicking on “Delete Selected Recording Files” after
selecting the recording files.
Figure 125: Conference Recording
To Next Page
Loading...
Need help?
General
