During the wizard, the user can quit the setup wizard at any time to start over with manual configuration. At the
last step of the wizard, the user will be provided with summary for review, before the configuration is loaded.
Once the setup is completed, the system is ready to go.
Web GUI Configurations
There are four main sections in the Web GUI for users to view the PBX status, configure and manage the PBX.
• Status: Displays PBX status, System Status, System Events and CDR.
• PBX: To configure extensions, trunks, call routes, zero config for auto provisioning, call features, internal
options, IAX settings and SIP settings.
• Settings: To configure user management, network settings, firewall settings, change password, LDAP
Server, HTTP Server, Email Settings, Time Settings, NTP server, recording storage and login timeout.
• Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot, syslog
setup and troubleshooting.
Web GUI Languages
Currently the UCM6200 series web GUI supports English, Simplified Chinese, Traditional Chinese, Spanish,
French, Portuguese, Russian, Italian, Polish, German and etc.
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after logging
in.
Figure 9: UCM6200 Web GUI Language
To Next Page
Loading...
Need help?
General
