UCM6200 Series User Manual
• Click on “Add Follow Me Number” to add local extensions or external numbers to be called after ringing the
extension selected in the first step.
• Once created, it will be displayed on the follow me web page list. Click on to edit the Follow Me
configuration. Click on to delete the Follow Me.
The following table shows the Follow Me configuration parameters.
Table 75: Follow Me Settings
Configure to enable or disable Follow Me for this user.
If external number is added in the Follow Me, please make sure this option is
enabled or the “Skip Trunk Auth” option of the extension is enabled, otherwise
the external Follow Me number cannot be reached.
Configure the Music On Hold class that the caller would hear while tracking the
user.
By default, it is enabled and user will be asked to press 1 to accept the call or to
press 2 to reject the call after answering a Follow Me call.
If it is disabled, the Follow Me call will be established once after the user answers
it.
When enabled, the call will be routed to the default destination if no one in the
Follow Me extensions answers the call.
Configure the destination if no one in the Follow Me extensions answers the call.
The available options are:
• Extension
• Voicemail
• Queues
• Ring Group
• Voicemail Group
• IVR
• External Number
The added numbers are listed here. Click on to arrange the order. Click
on to delete the number. Click on to add new numbers.
Add a new Follow Me number which could be a ‘Local Extension’ or ‘External
Number’. The selected dial plan should have permissions to dial the defined
external number.
Select the order in which the Follow Me destinations will be dialed to reach the
user: ring all at once or ring one after the other.
• Click on “Follow Me Options” to enable or disable the options listed in the following table.
To Next Page
Loading...
