Grandstream Networks UCM6206 User Manual

P a g e | 225
UCM6200 Series User Manual
PICKUP GROUPS
The UCM6200 supports pickup group feature which allows users to pick up incoming calls for other extensions
if they are in the same pickup group, by dialing "Pickup Extension" feature code (by default *8).
Configure Pickup Groups
Pickup groups can be configured via Web GUI->PBX->Call Features->Pickup Groups.
• Click on "Create New Pickup Group" to create a new pickup group.
• Click on to edit the pickup group.
Select extensions from the list on the left side to the right side.
Figure 146: Edit Pickup Group
• Click on to delete the pickup group.
Configure Pickup Feature Code
When picking up the call for the pickup group member, the user only needs to dial the pickup feature code. It’s
not necessary to add the extension number after the pickup feature code. The pickup feature code is configurable
under Web GUI->PBX->Internal Options->Feature Codes.
The default pickup feature code is *8.

Grandstream Networks UCM6206 Specifications

General

Brand	Grandstream Networks
Model	UCM6206
Category	IP Phone
Language	English