Figure 233: Create New Backup
1. Choose the type(s) of files to be included in the backup.
2. Choose where to store the backup file: USB Disk, SD Card or Local.
3. Name the backup file.
4. Click on "Backup" to start backup.
Once the backup is done, the list of the backups will be displayed with date and time in the web page. Users can
download , restore , or delete it from the UCM6200 internal storage or the external device.
Click on to upload backup file from the local device to UCM6200. The uploaded backup file
will also be displayed in the web page and can be used to restore the UCM6200.
It is also possible to load backup files from UCM6100 to UCM6200 and vice versa.
Please make sure the FXO port settings, total number of extensions and total number of conference rooms are
compactable before restore to another UCM model. Otherwise it will prompt a warning and stop the restore
process as shown below:
Figure 234: Restore Warning
To Next Page
Loading...
Need help?
General
