UCM6200 Series User Manual
Select the “Music On Hold” Class of this Ring Group, “Music On Hold” can be
managed from the “Music On Hold” panel on the left.
This option is to set a custom prompt for a ring group to announce to caller.
Click on ‘Prompt’, it will direct to the page PBX->Internal Options->Custom
Prompt, where users could record new prompt or upload prompt files.
Ring Timeout on Each
Member
Configure the number of seconds to ring each member. If set to 0, it will keep
ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has ring
timeout settings as well.
If enabled, calls on this ring group will be automatically recorded. The default
setting is No. The recording files can be accessed from web GUI->CDR-
>Recording Files.
If enabled, the UCM will replace the caller display name with the Ring Group
name the caller know whether the call is incoming from a direct extension or a
Ring Group.
If enabled, users could select extension, voicemail, ring group, IVR, call queue,
voicemail group as the destination if the call to the ring group has no answer.
Secret and Email address are required if voicemail is selected as the
destination.
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Configure the Email address of the ring group extension's voicemail. If "Attach
Recordings to E-mail" is enabled from Web GUI->PBX->Voicemail-
>Voicemail Email Settings, the voicemail can be sent to the ring group's
Email address as attachment.
To Next Page
Loading...
