6
────────────────────────────────────────────────────
2.1 Installation of the Unit
────────────────────────────────────────────────────
CAUTION
Ventilation holes for heat radiation are provided on the top of the
product. Leave sufficient space around the ventilation holes and
install the product with the holes unobstructed. Installation of the
product with the ventilation holes obstructed may cause a
malfunction or fire.
5cm
or more
5cm
or more
5cm
or more
10 cm or more
CAUTION
Do not apply strong downward pressure with the stand extended.
Damage to the stand will result.
Installation Conditions
Locate the unit so that the following conditions are met.
Temperature: 10 to 40 , Humidity: 85%RH or less (with no condensation)
Avoid the following locations:
Subject to direct sunlight
Subject to high levels of dust, steam, or corrosive gases
In intense electromagnetic fields, near high-voltage equipment or power lines.
Near a heat source.
On an unstable or vibrating surface.
Placement
The unit should be placed either level, or tilted using
the bail.
To Next Page
Loading...