Hioki 7075 - Setting the Synchronized Operation (SYNCHRO); Self Testing (TEST)

57
────────────────────────────────────────────────────
6.4 Setting the Synchronized Operation (SYNCHRO)
────────────────────────────────────────────────────
NOTE
6.4 Setting the Synchronized Operation (SYNCHRO)
6.5 Self Testing (TEST)
These settings control synchronized drive operation.
For details, see Chapter 7.
OFF
Disables synchronized drive. There is no output
from the synchronized drive terminal of the
external interface.
MASTER
Set this unit to be the master device for
synchronized drive.
SLAVE
Set this unit to be a slave device for
synchronized drive.
Activates main unit self testing.
LCD
Tests the LCD screen.
PANEL&BEEP
Tests the touch panel and beeper.
KEY&LED
Tests other keys and LED lighting.
MEMORY
Tests internal memory.
If the MEMORY is pressed, the settings of the unit are
initialized.