Hioki 7075 - Specific Commands for Environment;Miscellaneous Settings

83
────────────────────────────────────────────────────
8.3.2 Specific Commands for Environment/Miscellaneous Settings
────────────────────────────────────────────────────
Syntax
:SYSTem:BEEPer <ON/OFF>
Example
:SYST:BEEP OFF
Disables the beep sound.
Syntax
:SYSTem:BEEPer?
Response
syntax
(Header ON)
:SYSTEM:BEEPER <NR1>
(Header OFF)
<NR1>
Example
Transmission
Response
:SYST:BEEP?
(Header ON)
:SYSTEM:BEEPER OFF
(Header ON)
OFF
Syntax
:SYSTem:CRToff <ON/OFF>
ON The backlight automatically turns
off after a specific idle time.
OFF The backlight remains lit.
Example
Transmission
:SYST:CRT OFF
Disables the auto backlight off
function so the backlight remains lit.
Function
Enables or disables the beep sound.
Error
(Command error)
When the setting data contains characters
other than ON or OFF.
Function
Queries the current setting of beep sound
enablement.
Note
With this query, if any error occurs, no
response message is produced.
Function
Enables and disables the automatic LCD
backlight off
Error
(Command error)
When the setting data contains characters
other than ON or OFF.
8.3.2 Specific Commands for Environment/Miscellaneous
Settings
:SYSTem:BEEPer
Enables and disables beep sound.
:SYSTem:BEEPer?
Queries the beep sound setting.
:SYSTem:CRToff
Enables and disables the automatic LCD backlight off