Hioki 7075 - Page 94

84
────────────────────────────────────────────────────
8.3.2 Specific Commands for Environment/Miscellaneous Settings
────────────────────────────────────────────────────
Syntax
:SYSTem:CRToff?
Response
syntax
(Header ON)
:SYSTEM:BEEPER <ON/OFF>
(Header OFF)
<ON/OFF>
Example
Transmission
Response
:SYST:CRT?
OFF
Syntax
:SYSTem:DATE <year>,<month>,
<day>
<year>= 0 to 99
<month>= 1 to 12
<day>= 1 to 31
(NR1 numerical data)
Example
Transmission
:SYST:DATE 99,3,17
Sets the date to 3/17/99.
Syntax
:SYSTem:DATE?
Response
syntax
(Header ON)
:SYSTEM:DATE <year>,<month>,
<day>
(Header OFF)
<year>,<month>,<day>
Example
Transmission
Response
:SYST:DATE?
(Header ON)
:SYSTEM:DATE 99,3,17
(Header OFF)
99,3,17
Function
Queries the current setting for automatic
LCD backlight off.
Note
With this query, if any error occurs, no
response message is produced.
Function
Sets the date.
Note
<year>, <month> and <day> can be in
NRf format, in which case extra digits
are rounded off.
Errors
(Command error)
When <year>, <month>, <day> was not
in NRf format.
(Execution error)
When attempting to set an out-of-range
value.
Function
Returns the internal calender settings
as NR1 numerical format (<year>,
<month>, <day>).
Note
With this query, if any error occurs, no
response message is produced.
:SYSTem:CRToff?
Queries the automatic LCD backlight off setting.
:SYSTem:DATE
Sets the date.
:SYSTem:DATE?
Queries the internal calender