Performing Basic Operations
Unit Measure Channel Trigger Alarm Calculation System
11
Text entry
You can perform the operations listed below by choosing the operation on the screen and pressing
the ENTER key.
You can also use the corresponding key to perform the same operation.
Operation on screen Corresponding key Description
OK START Accepts the character.
Cancel ESC Closes the window without entering any text.
Clear FILE Deletes all entered text.
BS
Deletes the previous character (backspace).
DEL
Deletes the next character (delete).
<<
Moves the cursor to the left.
>>
Moves the cursor to the right.
List WAVE Allows you to choose words from the registered words in
the instrument.
Hist SET Allows you to choose words from the words previously
entered.
Repetitive words
You can choose words, such as test, research, and temperature, from the list.
Editing the repetitive word list
You can edit the repetitive word list.
The list can contain up to 20 words.
Enter the words you wish to register into a text le and have the instrument read the le. When
reading the le, the instrument will overwrite the existing words.
Initializing the instrument cannot recover the factory-default word list.
Referring to the example described below, create a text le. Save the created le onto the SD
Memory Card or the USB Drive to have the instrument read the le.
• Format: text le
• Filename: any name available
• Extension: .txt or .TXT
• Encoding: UTF-8
• Number of words to be registered: Up to 20
Settings and Operation
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
