Hioki LR8450 - Page 313

308

Functionality for
saving setting
conditions

memory.
Auto-setup function 
Drive can be automatically loaded when the instrument is powered on.

Memory Card and a USB Drive, setting conditions have the following precedence:
instrument memory, SD Memory Card, and USB Drive.
Prevention of
inadvertent START/
STOP key operation
When the START or STOP key is pressed, the system will display a message asking
whether the user wishes to start or stop measurement.

Key lock function Disables operation keys (enabled/disabled by pressing and holding the ESC key for 3 s or
more).
Beep tone 󰀨
Self-check function Can check keys, LCD, ROM/RAM, LAN, media, and modules.
Display of horizontal
axis (time values)
Horizontal axis (time value) display can be set to time, date, or data point count.
Setting is applied when text data is saved.
Measurement
start/stop time
specication function
Measurement start and stop conditions can be set.

•Start and stop times (year, month, day, hour, and minute) can be set.
Conguration
navigation (Quick
Set) function
Wireless module registration guide (LR8450-01 only), countermeasures against wireless
communication failure (LR8450-01 only), connection diagram display (strain gage,
external terminals), loading setting conditions
Power supply
frequency lter
function
50 Hz/60 Hz selection
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187