315
Measurement
target
Type Range
Maximum
resolution
Measurable range
Measurement
accuracy
Humidity – As per
measurement
accuracy of
the Z2000
Humidity
Sensor
5030200
0
5
60
80
95
100
±8% RH
±6% RH
±5% RH
±10% RH
±8% RH
±6% RH
±10% RH
±8% RH
±6% RH
Temperature (°C)
Humidity accuracy table
: Out of accuracy guarantee range
Each boundary line is included in the better measurement accuracy area.
Accuracy of
reference junction
compensation
±0.5°C (with input terminal temperature balancing)
Reference junction compensation: Add thermocouple measurement accuracy when set
to internal.
Temperature
characteristics
humidity, see humidity accuracy table).
Normal-mode
rejection ratio
50 dB or greater
interval of 5 s)
interval of 5 s)
(With thermocouple wire break detection disabled)
Common-mode
rejection ratio
Signal source resistance of 100
or less
100 dB or greater
(With 50 Hz/60 Hz input and a data refresh interval of 10 ms)
140 dB or greater
interval of 5 s in the 10 mV f.s. range)
interval of 5 s in the 10 mV f.s. range)
(With thermocouple wire break detection disabled)
Eect of radiated
radio-frequency
electromagnetic eld
range)
Eect of conducted
radio-frequency
electromagnetic eld
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
