Hitachi 902 - Standby Status

7 - 29
7.4.3 Standby Status
(1) If the water level in the incubator drops, the feed pump and SV4 are turned on for 1
second.
(2) The incubator pump and light source lamp remain turned on.
(3) Incubator temperature control is made.
Parameter Check
For details of parameter check, refer to the specifications of data processing functions.
Each status
Feed pump OFF
Vacuum pump OFF
Wait for
startup of each
processing
Displayed alarm clear
Standby
Parameter
check
Reset
Instrument
monitor
Instrument monitor
WARNING display
NG
OK