Hitachi 902 - At Input of START Key in STANDBY Status; Parameter Check; Processing Flow

2 - 29
2.3 Parameter Check
Parameter check is carried out on the channel for which test is selected on the CHANNEL
ASSIGNMENT screen at start of analysis.
2.3.1 Processing Flow
(1) At input of START key in STANDBY status.
Twin test
simultaneous analysis
parameter check
Check result?
Analytical method
check
Calibration parameter Serum index analytical
check method check
Volume check Reagent relationship check
at carry-over cleaning
Upper/lower limit value CH, ACTIVATE check
check
Test-to-test Check result?
compensation check
Analytical mode check
1)
1)
STOP
NG
OK
OK
NG
START
STOP