Hitachi 902 - Screen Information Transfer Screen; System Menu Screen; Waiting for Request to Initialize Flash Memory

12 - 14
(5) System Menu Screen
[System Menu]
[Menu End]
[Transfer Mode]
[Maintenance Mode]
Press [Transfer Mode] key to enter transfer mode.
The next screen is displayed.
(6) Screen Information Transfer Screen
[Transfer Mode]
Tool –> PT
Screen data
XX kbyte
[Stop]
During transfer, the indication of memory capacity changes.
When the memory indication (XX kbyte) is cleared, press [Stop] key.
Note: Do not press the [STOP] key before, or the full installation procedure
inclusive 12.11.4 and 12.11.5 will have to be carried out !
The next screen is displayed.
(7) Waiting for Request to Initialize Flash Memory
Flash memory will be initialized.
Are you sure?
[Yes] [No]
Waiting for Request to Initialize Flash Memory
[Yes] : Execution of flash memory initialization
[No] : End (suspension of installation)
Press [Yes].
The next screen is displayed.