Hitachi 902 - Analytical Data Transfer (from Analyzer to Host); Text Size and Composition

16 - 30
(5) Analytical Data Transfer (from analyzer to host)
Shown below are the contents of each text.
(a) Analytical data transfer for routine, stat and control samples
The text size (number of transferred words between STX code and end code) is selectable tetween the two given below.
Table 16-14 Text Size and Composition
Text Size Mode Text Composition (B: Byte count) Max. Test Count/text Max. Text Count Channel Count Remarks
256 Real time or
batch
1b 1b 2b 37b 3b 10b × test count n 1b 1b
1st STX 1 Fu Sample information Channel count Analytical data ETX BCC (1ch to 20ch)
Final STX : Fu ↑ ↑ ↑ ETX BCC (21ch to 40ch)
20 2 40 or less Max. text count is 1 when
channel count is 20 or less.
1st STX 1 Fu ↑ ↑ ↑ ETX BCC (1ch to 20ch)
2nd STX 2 Fu ↑ ↑ ↑ ETX BCC (21ch to 40ch)
Final STX : Fu ↑ ↑ ↑ ETX BCC (41ch to 51ch)
3 Within 41 to 51
512 Real time or
batch
1st STX 1 Fu ↑ ↑ ↑ ETX BCC (1ch to 46ch)
Final STX : Fu ↑ ↑ ↑ ETX BCC (47ch to 51ch)
46 2 51 or less