Hitachi 902 - Contents of Text; Details of Function Character (Fu)

16 - 38
6) Data for up to three tests is collectively transferred to the host.
7) This text is transferred only when the ISE unit is provided at option.
16.6.2 Contents of Text
(1) Details of Function Character (Fu)
Space
Character in table below
Table 16-23 Function Characters for Test Selecting Information Inquiry and
Analytical Data
Form
Test Selecting
Information Inquiry
Analytical Data
Direction of
Communica-
tion
Analyzer
Host
Analyzer
↑↑
Host
Analyzer →→ Host
Sample Name
With/without
ID
Real-time
Communica-
tion
Batch
Communica-
tion
Real-time
Communica-
tion
Batch
Communica-
tion
Routine sample With D A a
Stat sample D d
Control sample With or without F f
Calibration sample
(photometry assay)
Both G
Calibration sample
(ISE)
H
Routine sample Without N N n
Stat sample Q q
Absorbance in entire
reaction process
(routine)
Both I
Absorbance in entire
reaction process (stat)
K
Supplementary Explanation
1. In the function character form for analytical data, the upper-case letters are used for real-
time communication and the lower-case letters for batch communication.
2. In transfer from the analyzer to the host, batch communication for test selecting information
inquiry is not carried out. (Only in simple analysis mode setting)
3. Batch communication for analytical data transfer indicates a communication when specified
through the screen.
Transfer sequence
↑
↓