Procedure
1. Press the button, and then slide the dual in-line memory module (DIMM)
cover in the direction of the arrow and remove the DIMM cover from the
hooks on either side.
2. Lift the DIMM cover gently to remove it.
Note: The DIMM cover has a band that can be damaged easily.
Exercise care when removing the DIMM cover.
3. Pull the lever outward.
4. Hold both ends of the cache memory, and then gently pull out the cache
memory from the socket.
Note:
Do not exert pressure on the cache memory. Otherwise, you
can damage the printed circuit board.
Replacing a controller 167
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
