Note: The restore operation can take up to 20 minutes to
complete. If you receive a message about the failed recovery, go
to the Customer Contact Us page at https://support.hds.com/
en_us/contact-us.html.
2. When the progress bar goes away and the completion message appears,
click Close.
3. If you receive a message about the encryption environment setting is
applied, click Close.
4. Click the CTLs tab and confirm that the status of the new controller you
replaced is Normal. If necessary, click Refresh at the top-right of the
window to update the status in the window.
5. Log out and close the Maintenance Utility window.
180 Replacing a controller
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
