Troubleshooting code Failure level Recovery action
application when allowed. If
you cannot change the port
number (see Changing SVP port
numbers), change the port
number for RMIIFRegist and
then restart the SVP.
TRRMIS002009 WARN
The ports necessary for the
RMI-API Forward Server service
cannot be used.
Check that the ports report to
the log are not used by another
application and change the port
number of the appropriate
application when permitted. If
you cannot change the port
number (see Changing SVP port
numbers), change the port
number for DKCManPrivate and
then restart the SVP.
TRRMIS002010 WARN
Use the recovery action for
TRRMIS002008.
TRRMIS002011 WARN
Use the recovery action for
TRRMIS002009.
TRRMIS002012 INFO
Output when the RMI-API
Forward Server service stops.
To confirm that the RMI-API
Forward Server service stopped
normally, match it to the log
and check that TRRMIS002013
is output.
TRRMIS002013 INFO
Output when the RMI-API
Forward Server service stopped
normally.
Web Application Server
The following example is a log output when it is normal.
[2015/12/02 16:21:47.113][INFO ][TRMAAS000001][Web Application Server]
[Initializing]
[2015/12/02 16:21:48.410][INFO ][TRMAAS000002][Web Application Server][Ready]
The following example is a log output when it is abnormal.
[2015/12/03 09:47:22.020][INFO ][TRMAAS000001][Web Application Server]
[Initializing]
[2015/12/03 09:48:25.004][ERROR][TRMAAS000004][Web Application Server][Failed :
Failed to connect to the starting port of the web server. Port=8080.]
Troubleshooting the storage system 353
Service Guide for VSP Gx00 and VSP Fx00 Models
To Next Page
Loading...
