Hitachi G200 - Page 363

Stop the appropriate storage
system once and restart it.
If the condition does not
change after restarting, restart
the SVP.
If the condition does not
recover after restarting the SVP,
set it up again.
TRRMIS000012 WARN
The IP address used in the RMI-
API Server service is invalid.
Check that the IP address of
the SVP set by the Storage
Device List is correct and
restart the SVP.
If the condition does not
recover after restarting the SVP,
set it up again.
TRRMIS000013 ERROR
TRRMIS000014 WARN
Operating with the default
value indicated in the log
content because the acquisition
of the port number used for the
RMI-API Server service failed.
Check that the port value of the
port number key PreRMIServer
is set correctly (see Changing
SVP port numbers). Stop the
appropriate storage system
once from the Storage Device
List and restart it.
If the condition does not
change after restarting, restart
the SVP.
If the condition does not
recover after restarting the SVP,
set it up again.
TRRMIS000015 INFO
Output when the RMI-API
Server service terminates.
The log is output two or more
times by retry at the time of
error occurrence.
To confirm that the RMI-API
Server service is completed
normally, match it to the log
and check the output of
TRRMIS000016 is output.
TRRMIS000016 INFO
Output when the RMI-API
Server service is stopped
normally.
TRRMIS000017 WARN
The connection to the
necessary services failed in the
RMI-API Server service.
TRRMIS000018 ERROR
Troubleshooting the storage system 363
Service Guide for VSP Gx00 and VSP Fx00 Models