EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 81
07/11
Running a Mimic Tour
You can run a mimic tour that you have programmed.
To run a mimic tour:
To stop a mimic tour:
•In the Live View or PTZ Dome Setup tab, in the PTZ Settings panel, under
Mimic Tour Details, click Halt.
You can also stop a mimic tour by manually controlling the dome or by
sending the dome to a preset, a mimic tour, or another preset tour.
Deleting a Mimic Tour
You can delete a mimic tour that you have programmed.
To delete a mimic tour:
Method 1 (Web Client Application)
1. Click the Live View or PTZ
Dome Setup tab.
2. In the PTZ Settings panel, in
the Mimic Tour Details box,
type the number of the mimic
tour that you want to run, and
then click Run.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 1 to select PTZ Mimic
Tour Menu.
3. Press 1 to select Run a Mimic
Tour.
4. Type the number of the mimic
tour that you want to delete and
then press ENTER.
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the PTZ Settings panel, in
the Mimic Tour Details box,
type the number of the mimic
tour that you want to delete, and
then press Delete.
The message
Deleted Mimic
Tour
appears.
3. Press ESC to exit.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 1 to select PTZ Mimic
Tour Menu.
3. Press 3 to select Delete a
Mimic Tour.
4. Type the number of the mimic
tour that you want to delete and
then press ENTER.
To Next Page
Loading...
Need help?
General
