EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 125
07/11
Clearing the Memory
You can delete all of the alarms, presets, preset tours, and sectors stored in the
dome’s memory. Clearing the memory does not affect the OSD language or
privacy zones.
To clear the memory:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 3 to select Clear The Memory.
The following message appears:
EXTREME CAUTION: This will delete all of the Alarms, Presets,
Preset Tours and Sectors that are stored in memory. Are you
sure you want to do this? Y/N
Select Y (yes) to continue, or select N (no) to cancel.
Displaying Error Logs
You can view a count of errors and other anomalous events (resets, timeouts,
overruns, and mismatches) logged by the dome.
To display the error logs:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 4 to select Operational Diagnostics.
3. Press 1 to select Display Error Logs.
Clearing Error Logs
You can reset all counts in the error log table to zero.
To clear the error logs:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 4 to select Operational Diagnostics.
3. Press 2 to select Clear Error Logs.
To Next Page
Loading...
Need help?
General
