EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 79
07/11
Viewing a List of Preset Tours
You can view a list of programmed preset tours.
To view a list of preset tours:
Deleting a Preset Tour
You can delete a preset tour that you have programmed.
To delete a preset tour:
Enabling or Disabling Still Preset
You can enable still preset so that a freeze-frame of the last preset is displayed
on the screen while the dome moves to the next preset. The effect is similar to a
video switcher switching between cameras. An asterisk is displayed on the
screen when the dome is moving between presets.
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the Camera Menu panel, in
the Miscellaneous Menu box,
select List Preset Tour Menu,
and then click Display.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 4 to select List
PS/PT/Sectors.
3. Press 2 to select Preset Tours.
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the PTZ Settings panel,
under Preset Tour Details,
click Program.
3. Type the number of the preset
tour that you want to delete and
then press ENTER.
4. Press ENTER again twice.
5. Type D and press ENTER.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 7 to select Delete
PS/PT/Sectors.
3. Type the number of the preset
tour that you want to delete.
If the deletion is successful, the
message
Delete Success
appears.
To Next Page
Loading...
Need help?
General
