Document 800-04194V1 Rev A 23
07/11
4
Preparing to Configure the Dome
This chapter contains the following sections:
• Installing the Honeywell IP Utility, page 23
• Logging On to the Honeywell IP Utility, page 26
• Connecting to a Device, page 27
• Configuring the Network Settings of a Device, page 27
• Logging On to the ACUIX™ IP Web Client Application, page 28
• Overview of the ACUIX™ IP Web Client Application, page 30
Installing the Honeywell IP Utility
After you have installed the dome, you are ready to configure the dome settings.
To do this, you will need to install the Honeywell IP Utility on your workstation.
Before you install the Honeywell IP Utility, ensure that your workstation meets the
following system requirements:
Operating System
• Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, or
Windows 7
Hardware Requirements
• Recommended Minimum: Pentium 2.4 GHz or higher with 512 MB RAM or more
Prerequisites
• Internet Explorer 6 or later
• Microsoft .NET Framework 3.5 or later
• Microsoft Visual C++ 2005 and Microsoft Visual C++ 2008 Redistributable Package
To Next Page
Loading...
Need help?
General
