EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 89
07/11
Viewing a List of Sectors
You can view a list of programmed sectors on the screen.
To view a list of sectors:
Deleting a Sector
You can delete a sector that you have programmed.
To delete a sector:
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the Camera Menu panel, in
the Miscellaneous Menu box,
select List Sectors Menu, and
then click Display.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 4 to select List
PS/PT/Sectors.
3. Press 3 to select Sectors.
Method 1 (Web Client Application)
1. Click the PTZ Dome Setup tab.
2. In the PTZ Settings panel,
under Sector/Privacy Zone
Details, click Program.
3. Type the number of the sector
that you want to delete and then
press ENTER.
4. Press ENTER again.
5. Press D to delete the sector.
6. Press ESC to exit.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 6 to select Function
Programming.
2. Press 7 to select Delete
PS/PT/Sectors.
3. Select the sector you want to
delete.
If the deletion is successful, the
message
Delete Success
appears.
To Next Page
Loading...
