Document 800-04194V1 Rev A 71
07/11
9
Configuring Presets, Tours, Privacy
Zones, Sectors, and Alarms
This chapter contains the following sections:
• Configuring Presets, page 71
• Configuring Advanced Presets, page 74
• Configuring Preset Tours, page 77
• Configuring Mimic Tours, page 80
• Configuring Default Functions: Presets and Tours, page 82
• Configuring Timed Functions, page 83
• Configuring Privacy Zones, page 84
• Configuring Sectors, page 88
• Configuring Alarms, page 90
Configuring Presets
A preset is a memorized dome function that can be recalled manually by the
operator, recalled automatically by a programmed alarm, or set as a default
function when the dome has been idle for a specified length of time.
The dome supports up to 150 user-definable presets when using Diamond or
IntelliBus™ protocol; 132 when using MAXPRO-mode; or 99 when using VCL
protocol.
To Next Page
Loading...
Need help?
General
