34
Preparing to Configure the Dome
Figure 4-7 Compression Settings and Statistics Panels
Video Analytics
In the Video Analytics tab, you can configure the tamper detection threshold
settings for blur, blinding, and scene changes. Each setting has three threshold
levels: high (80%), medium (50%), and low (30%). When these thresholds are
exceeded, a message appears on the screen to indicate that possible dome
tampering has occurred.
To prevent false alarms, the tamper detection features should be manually
disabled under the following conditions:
• During the configuration of the video display
• While text is overlaid on the video
• If the video display becomes too dark
Enable Received to show
image statistics in real time.
Set the resolution for NTSC
or PAL video signals.
To Next Page
Loading...
Need help?
General
