64
Configuring HDXG Camera Settings
Setting the Chroma Level
The chroma level controls the color saturation of the image.
To set the chroma level:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 3 to select Video Setup.
3. Press 3 to select Chroma Level 0–255.
4. Type a value from 0 through 255 where:
• 0 = picture has no color
• 255 = picture color is saturated
• 127 = default
5. Press ENTER.
Note Setting the chroma level to a value other than 127 may upset auto
white balance (AWB) operation.
Setting Backlight Compensation
Backlight compensation (BLC) corrects for strong background lighting by
enhancing subjects in the foreground, providing detail that would normally be
silhouetted.
You can turn backlight compensation on or off by using special preset 93 when
the dome is configured for MAXPRO-mode, VCL, Pelco P, or Pelco D protocol.
Note In most applications, wide dynamic range may be a better option than
backlight compensation.
To Next Page
Loading...
