EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 51
07/11
Setting Exposure
Manual Exposure Control
You can manually control the exposure by selecting a value from 0 through 14,
where 0 is for dark applications and 14 is for bright applications.
To learn more about manual exposure control, see About ACUIX PTZ Dome
Manual Exposure Control on page 100.
To set the exposure:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
3. Press 2 to select Exposure Level.
4. Type a value from 0 through 14 (default = 7) and then press ENTER.
Auto Slow Shutter
You can set the camera to automatically slow the shutter time when low light is
detected. However, slow shutter times beyond 1/60 s (1/50 s) can cause motion
blurring at low light levels.
To enable/disable auto slow shutter:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
3. Press 7 to set auto slow shutter to ON or OFF (default).
Table 7-1 Minimum Focus Distances by Camera
Wide End Tele End
HDXA - 18× Color 29 cm 80 cm (default)
HDXJ -
18× WDR/TDN 29 cm 80 cm (default)
HDXF -
26× WDR/TDN 32 cm 150 cm (default)
To Next Page
Loading...
Need help?
General
