Honeywell equIP Series - Configuring Deinterlacing Filter Settings

EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 99
07/11
Configuring Deinterlacing Filter Settings
You can improve the image quality of an interlaced video source by applying a
deinterlacing filter. There are two deinterlacing filter settings available: camera
deinterlacing and PC deinterlacing.
Setting Camera Deinterlacing
To enable/disable camera deinterlacing:
1. Click the Video Analytics tab.
2. In the Deinterlacing Filter Settings panel, in the Camera Deinterlacing
box, select Enable or Disable (default).
3. Click Apply.
Setting PC Deinterlacing
To enable/disable PC deinterlacing:
1. Click the Video Analytics tab.
2. In the Deinterlacing Filter Settings panel, in the PC Deinterlacing box,
select Enable (default) or Disable.
3. Click Apply.