EQUIP
®
Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Document 800-04194V1 Rev A 65
07/11
To enable/disable backlight compensation:
Setting Auto Slow Shutter
Auto slow shutter permits the capture of bright, clear images in low light
conditions by increasing exposure times. However, slow shutter limit times
beyond 1/60 s can cause motion blurring at low light levels.
To set the auto slow shutter limit:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 3 to select Video Setup.
3. Press 5 to set Auto Slow Shutter Lim to one of the following:
• NTSC = 1/4 (default), 1/2, 1/60, 1/30, 1/15, 1/8
• PAL = 1/3 (default), 1/1.5, 1/50, 1/25, 1/12
Setting Wide Dynamic Range
Wide dynamic range (WDR) technology provides clear, balanced images in a
variety of lighting conditions, such as entrances with varying levels of
indoor/outdoor illumination and situations where backlighting makes it difficult
Method 1 (Web Client Application)
1. Click the Live View tab.
2. In the PTZ Settings panel, click
BLC.
Method 2 (OSD Menu)
1. From the OSD main menu,
press 5 to select Camera
Options.
2. Press 3 to select Video Setup.
3. Press 4 to set backlight
compensation to ON or OFF
(default).
To Next Page
Loading...
