Honeywell equIP Series - Configuring IVS Analysis Events

42
Configuring the OSD Menu
To change the time setting:
1. From the OSD main menu, press 7 to select Enhanced Settings.
2. Press 5 to select Time & Date Settings.
3. Press 4 to select Change Time.
4. Type a new time in HH:MM:SS (hours:minutes:seconds) and then press
ENTER.
To change the time format:
1. From the OSD main menu, press 7 to select Enhanced Settings.
2. Press 5 to select Time & Date Settings.
3. Press 3 to select the desired time format: 12 Hours or 24 Hours (default).
To show/hide the current date:
1. From the OSD main menu, press 7 to select Enhanced Settings.
2. Press 5 to select Time & Date Settings.
3. Press 2 to turn the date display ON or OFF (default).
To change the date:
1. From the OSD main menu, press 7 to select Enhanced Settings.
2. Press 5 to select Time & Date Settings.
3. Press 5 to select Change Date.
4. Type a new date in YYYY-MM-DD (year-month-day) format and then press
ENTER.