62
Configuring HDXG Camera Settings
To set the Manual AE mode:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
3. Press 2 to set the Manual AE Mode to one of the following:
• Iris (default): Provides manual iris control while the camera controls the
gain and shutter automatically.
• Gain: Provides manual gain control while the camera controls the iris
and shutter automatically.
• Full: Provides access to shutter speed, AGC level settings, and to
manual iris control.
• Shutter: Provides manual shutter control while the camera controls the
iris and gain automatically.
4. If Full is selected, do the following:
a. Press ESC to return to the previous menu.
b. Press 3 to select Full Manual Settings.
c. Set the Shutter Speed to one of the following:
• NTSC = 1/60 (default), 1/120, 1/180, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000, 1/30000
• PAL = 1/50 (default), 1/100, 1/150, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000, 1/30000
d. Set the AGC Level. Choose a value from 0 (default) through 30 dB.
e. Manually control the iris using Iris Open and Iris Close on the PTZ
controls in the Live View tab (see Figure 4-3 on page 30).
To slow the AE response speed:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
1. Press 4 to select Slow AE Response.
2. Type a value from 1 (default) through 254 and then press ENTER.
To Next Page
Loading...
