100
Field Description
Reference clock ID
Reference clock ID of the NTP server:
• If the reference clock is the local clock, the value of this field
is related to the value of the Clock stratumfield:
{ When the value of the Clock stratumfield is 0 or 1, this
field displaysLOCL.
{ When the Clock stratumfield has another value, this field
displaysthe IP address of the local clock.
• If the reference clock is the clock of another device on the
network, this field displaysthe IP address of the device. If the
device supports IPv6, this field displays the MD5 digest of
the first 32 bits of the IPv6 address of the device. If this field
displays INIT, the local device has not established a
connection with the NTP server.
VPN instance
VPN instance to which the NTP server belongs. If the NTP server
is in a public network, the field displays
Not specified
.
Local mode
Operation mode of the local device:
• unspec—The mode is unspecified.
• active—Active mode.
• passive—Passive mode.
• client—Client mode.
• server—Server mode.
• broadcast—Broadcast or multicast server mode.
• bclient—Broadcast or multicast client mode.
local poll interval
Polling interval of the local device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the poll interval of the local device is 26, or64 seconds.
Peer mode
Operation mode of the peer device:
• unspec—The mode is unspecified.
• active—Active mode.
• passive—Passive mode.
• client—Client mode.
• server—Server mode.
• broadcast—Broadcast or multicast server mode.
• bclient—Broadcast or multicast client mode.
peer poll interval
Polling interval of the peer device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the poll interval of the local device is 26, or 64 seconds.
Offset
Offset of the system clock relative to the reference clock, in
milliseconds.
roundtripdelay
Roundtrip delay from the local device to the NTP server, in
milliseconds.
dispersion Maximum error of the system clock relative to the reference clock.
Root roundtripdelay
Roundtrip delay from the local device to the primary timer server,
in milliseconds.
root dispersion
Maximum error of the system clock relative to the primary
reference clock, in milliseconds.
Reachabilities
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
To Next Page
Loading...
Need help?
General
