Huawei NetCol5000-A025 - Page 138

Menu Parameter Description Default Value
Date settings Species the date
displayed on the ACC.
Consistent with
the current
interface date
Time Species the time
displayed on the ACC.
Consistent with
the current
interface time
Time zone Species the time zone
displayed on the ACC.
Consistent with
the current
interface time
zone
Settings > Quick
Settings >
System Settings
Smart
diagnosis
function
Species whether to
enable the refrigerant
leakage detection
function. You are
advised to set this
parameter to Enable.
This function is available
only when the outdoor
unit is NetCol500-
A0365C11E0,
communicates with the
indoor unit through
RS485, and does not
contain a low-
temperature component.
Disable
Heating
function
Enable indicates that
the electric heater will
be started when the
ambient temperature is
lower than the certain
temperature range of
the temperature set
point. Disable indicates
that the electric heater
will not be started.
Enabled when active
power indicates that the
electric heater will be
started when the main
power is active and the
ambient temperature is
lower than the certain
temperature range of
the temperature set
point.
Enable
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 4 Power-On Commissioning
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 128