Step 2 Tap the le where the user saves current data in the Select Path dialog box and
tap Next. Then tap Conrm in the displayed dialog box.
Step 3 After the data is successfully exported, Figure 7-21 is displayed. Click Finish.
Figure 7-21 Screen showing that data export has succeeded
Step 4 Click Maint > USB Operations > Remove USB to remove the USB ash drive in
safe mode.
Step 5 Tap Maint > USB Operations > Import
Cong on the screen of smart cooling
product 2, as shown in Figure 7-22.
Figure 7-22 Select
le
Step 6 Select the le that needs to be imported and tap Next, as shown in Figure 7-23.
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 7 FAQ
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 284
To Next Page
Loading...
