Figure 3-28 Securing an indoor unit to a base
Figure 3-28 shows only how the cabinet is secured to the base. Secure the base based on
site requirements.
----End
Scenario Without a Base
Step 1 Drill holes in the
oor based on the hole distances shown in Figure 3-27.
Step 2 Place the cabinet at the designated position and secure it to the
oor using four
M12 expansion bolts, as shown in Figure 3-29.
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 3 Installation Guide
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 57
To Next Page
Loading...
