12-24
12. GPS OPERATION (ADVANCED)
GPS Alarm
The transceiver can sound a GPS Alarm when a target station or position comes into the alarm area.
This function can be set to a caller station, all GPS Memories, a selected GPS Memory group, or a
selected GPS Memory.
Alarm Area (Group) (Setting plural stations)
When “All Memories” or a GPS Memory group is selected:
Alarm Area (RX/Memory) (Setting specific station)
When a specific GPS Memory is selected:
Point C
Your location
Point A
Point B
0.25′ 0.25′
0.25′ 0.25′
N
Target
station
Sounds 3 beeps.Sounds a beep.
Limited range
approximately 500 m, 547 Y
Extended range
approximately 1 km, 1094 Y
Your location
N
To Next Page
Loading...
